Products
-
Kitchen Cabinet Rubber damper Buffers Soft Closers
Gas spring buffer cabinet gas spring is an elastic element with gas and liquid as the working medium. It is composed of pressure pipe, piston, piston rod and several connecting pieces. Its interior is filled with high-pressure nitrogen. Because there is a through hole in the piston, the gas pressures at both ends of the piston are equal, but the sectional areas at both sides of the piston are different. One end is connected with a piston rod and the other end is not. Under the effect of gas pressure, the pressure towards the side with small sectional area is generated, That is, the elastic force of the gas spring. The size of the elastic force can be set by setting different nitrogen pressures or piston rods with different diameters. Air spring of buffer cabinet is widely used in component lifting, support, gravity balance and replacing excellent mechanical spring. The air spring of buffer cabinet is produced with the latest structure of oil circuit circulation to control the gas displacement, with the excellent characteristics of rising buffer and light in place.
-
Gas Spring End Fittings & Bracket
Find full technical specifications for the end fitting configurations available on our standard range of Volume Line & Custom Line gas spring products.
Within our Volume Line product range threaded ball studs are available as a separate add on accessory for composite & metal ball joint end fittings. Custom Line ball joint end fittings include ball studs with the ball joint end fitting.
-
Safety Shroud Gas spring
Safety Lock holds gas spring in extended position until released
Added safety in case of gas spring failure/damage or accidental closing
Increased product control and operator protection
Black Nitride Rod Finish
Available from Stock
End of Travel Dampening
Orbital Riveted Piston Assembly
Selection of Force Ratings
Composite & Steel Ball Socket End Fittings -
High Performance Height Adjustable Lockable Gas Spring
Controllable gas spring, also known as lockable gas spring, angle-adjustable gas spring, controls the stroke by opening and closing the valve, so that the stroke can be stopped at any position, and is mostly used for tables, beds, desks, chairs, paint lamps and other angles, Where the height needs to be adjusted. According to the locking force, it can be divided into elastic locking and rigid locking, and rigid locking can be divided into compression locking and tension locking according to the different locking directions.
-
Tension & Traction Gas Spring
Tension & Traction Gas Spring, these units operate in the direction opposite of compression gas springs. Mounting constraints often do not allow for the use of compression springs; i.e., doors and access panels hinged horizontally at the bottom and any type of cover or lid that must be pulled open or pulled shut. Tension gas springs also often function as tensioners on mechanical assemblies and belt drives.
-
Self-locking gas spring for chair arm rest
The self-lock gas spring is one of the gas strut springs, which increases the locking device on the basis of the standard gas strut spring. When the gas spring is compressed to the shortest, it can be locked to maintain the compression state. Unlocking the gas spring just needs to press down, and the gas spring return to a naturally stretched state.
-
Motion Dampers and Lid Stop Dampers
Uncontrolled movements when opening and closing, lifting and lowering lids are dangerous, uncomfortable, and stress on the material.
Tieying motion and lid stop dampers from the STAB-O-SHOC product line will solve this problem.
Through their damping force, each damper supports controlled motion during lifting and lowering of lid applications; they also reduce material wear by avoiding hard stops in the end position.
-
Mechanical BLOC-O-LIFT release systems for ultimate convenience
Tieying offers different release systems for BLOC-O-LIFT gas springs.
Mechanical actuation systems for ultimate convenience.
We turn ideas into solutions. Innovative thinking sparks Innovations.
TIEYING SOFT-O-TOUCH is an actuation system that does its part to make our lives more convenient, easier and safer. In conjunction with BLOC-O-LIFT gas springs.
-
BLOC-O-LIFT OBT
BLOC-O-LIFT OBT permits comfortable up-ward movements of applications,such astable tops, without the need to actuate arelease. This is made possible by a specialvalve system in the piston package.
ln the compression direction, BLOC-O-LIFTOBT can be locked in any direction.
