Gas Spring are widely used in daily production and life. Gas Spring made of different materials have different applications. In terms of materials, we can divide them into ordinary Gas Spring and stainless steel Gas Spring. Ordinary Gas Spring are common, such as air beds, rotary chairs, etc. Stainless steel Gas Spring should be used in special industries, such as food machinery, medical equipment, military industry, or industries with high temperature characteristics. But some people find that the Gas Spring cannot be pressed down during the use of the Gas Spring. Why? How should we solve it?
First of all, we need to know why the gas spring can't be pressed down?
First: The hydraulic rod may have been damaged, and the machine itself has failed, so the Gas Spring cannot be pressed down. This often happens when the Gas Spring is used for a period of time, the Gas Spring control is unstable, and the pressing fails.
Second: The angle of the Gas Spring hydraulic rod is used incorrectly, and the Gas Spring is also realized according to the lever principle. If the power arm of the Gas Spring is too short to fully exert the power of the power arm, then the Gas Spring will not be pressed down.
Third: The force of the hydraulic rod acting on the Gas Spring is too small. Generally, there is a corresponding pressure in the Gas Spring according to the design. If people are not strong enough, the Gas Spring will not be able to press down. Generally, if the internal pressure exceeds 25kg, it is difficult for human hands to lower it.
After we understand the reason why the Gas Spring cannot be pressed down, we can take measures to solve the problem according to the specific reason. When the Gas Spring hydraulic rod has been damaged, it is recommended not to use the damaged Gas Spring, but to replace it with a new Gas Spring. The possibility of repairing the damaged Gas Spring is very small, and the reuse efficiency is very low, and it is difficult to control. Therefore, replacing the gas spring is a better method. The hydraulic angle of the Gas Spring is improperly used, which makes it impossible to press down. I can properly adjust the hydraulic angle of the Gas Spring, extend the power arm, and make full use of the lever principle of the gas spring. This is the time. Since it is difficult to press the Gas Spring manually when the pressure basically exceeds 25kg, it is necessary to install it on the component and use the lever principle to press it down. Another thing we need to pay attention to is that we must pay attention to safety when replacing the Gas Spring or operating the lower compressed air spring. Although the Gas Spring is highly controllable, the Gas Spring contains high-pressure gas. If the operation is improper, there is a potential safety hazard.
In the process of installation and use of Gas Spring, attention should be paid to the problems that need to be paid to, the Gas Spring should be maintained, the Gas Spring should not be corroded, attention should be paid to the maintenance of Gas Spring, and the problem should be replaced in time to avoid potential safety hazards. When selecting Gas Spring, we should not only consider the price of Gas Spring, but also consider the quality of Gas Spring, and comprehensively compare and select the appropriate Gas Spring.
Post time: May-06-2023
