Nowadays, many people do not know much about its installation method. One of the advantages of gas spring is that it is easy to install, but how to install it better is not the same. There are certain requirements. Here we summarize the installation guidance on automobile gas spring, which can be used as a reference.
1. The gas spring piston rod must be installed in a downward position, not upside down, so as to reduce friction and ensure good damping quality and cushioning performance.
2. Determining the installation position of the fulcrum is the guarantee for the correct operation of the gas spring. The gas spring must be installed in a correct way, that is, when it is closed, let it move over the center line of the structure, otherwise, the gas spring will often automatically push the door open.
3. The gas spring shall not be subjected to tilting force or transverse force during operation.
It shall not be used as handrail.
4. In order to ensure the reliability of the seal, the surface of the piston rod shall not be damaged, and paint and chemicals shall not be painted on the piston rod. It is also not allowed to install the gas spring at the required position before spraying and painting.
5. The gas spring is a high pressure product, and it is strictly prohibited to analyze, fire roast and bump it at will.
6. Do not rotate the gas spring piston rod to the left. If it is necessary to adjust the direction of the connector, it can only be turned to the right.
7. Operating ambient temperature: － 35 ℃ － ＋ 70 ℃.
8. When installing the connection point, it shall rotate flexibly without jamming.
9. The selected size should be reasonable, the force should be appropriate, and the stroke size of the piston rod should have an 8mm margin.
Good installation methods and installation methods are still worth learning, so we can analyze them according to the actual situation. Avoid changes and pay attention to the installation operation methods.If you have any other question,please contact Guangzhou Tieying Gas Spring Technology Co.,Ltd.
Post time: Nov-14-2022
