To ensure the proper functioning of gas springs and maintain the safety of their applications, it is essential to conduct a thorough inspection. Here are the steps to follow:
1. Visual Examination: Start by visually inspecting the gas spring for any visible damage, such as dents, holes, or corrosion on the cylinder. Any such damage may indicate a compromised gas spring that needs replacement.
2. Operational Check: Observe the movement of the gas spring during operation. The movement should be smooth without any jerking or sticking. Any irregularities could signal an internal problem with the gas spring.
3. Leak Test: Check for signs of oil leakage around the seals. While a slight oil film is normal, significant leakage could indicate seal failure.
4. Force Measurement: Use a force gauge to measure the force of the gas spring. Compare the measured force to the spring's original specifications to ensure it is still delivering the required force.
5. Mounting Hardware: Inspect the mounting points and hardware. Loose or worn brackets can impact the gas spring's performance and potentially lead to failure.
6. Noise: Listen for any unusual sounds, as they could indicate internal issues or problems with the gas spring's mounting.
If the gas spring fails any of these checks, it should be replaced with the correct replacement to maintain safe and reliable operation.
Guangzhou Tieying Spring Technology Co.,Ltd set up in 2002,focusing on gas spring production for more than 20 years,with 20W durability test,salt spray test,CE,ROHS, IATF 16949.Tieying products includes Compression Gas Spring, Damper, Locking Gas Spring, Free Stop Gas Spring and Tension Gas Spring. Stainless steel 3 0 4 and 3 1 6 can be made. Our gas spring use top seamless steel and Germany Anti-wear hydraulic oil, up to 9 6 hours salt spray testing, - 4 0℃~80 ℃ Operating temperature, S G S verify 1 5 0,0 0 0 cycles use life Durability test.
☎Phone:008613929542670
Email: tyi@tygasspring.com
Post time: May-23-2024
