Installation method of lockable gas spring:
The lockable gas spring has a great advantage that it is easy to install. Here we describe the common steps for installing the lockable gas spring:
1. The gas spring piston rod must be installed in a downward position, instead of upside down, so as to reduce friction and ensure good damping quality and cushioning performance.
2. Determining the installation position of the fulcrum is the guarantee for the correct operation of the gas spring. The gas spring must be installed in a correct way, that is, when it is closed, let it move over the middle line of the structure, otherwise, the gas spring will often automatically push away.
3. The gas spring shall not be subjected to tilt force or lateral force during operation. It shall not be used as handrail.
4. In order to ensure the reliability of the seal, the surface of the piston rod shall not be damaged, and paint and chemicals shall not be painted on the piston rod. It is also not allowed to install the gas spring at the required position before spraying and painting.
5. The gas spring is a high-pressure product, and it is strictly prohibited to dissect, bake or smash it at will.
Attention shall be paid during installation: to ensure the reliability of sealing, the piston rod surface shall not be damaged, and paint and chemicals shall not be painted on the piston rod. It is also not allowed to install the gas spring at the required position before spraying and painting. Remember that the piston rod must not rotate to the left. as
It is necessary to adjust the direction of the connector, which can only be turned to the right. This also allows you to rotate in a fixed direction. The size of the gas spring should be reasonable, the force should be appropriate, and the stroke size of the piston rod should be spaced, so that it can not be locked, or it will be very troublesome to maintain in the future.
Post time: Dec-31-2022
