Excellent quality Cabinet Hydraulic Lift - Motion Dampers and Lid Stop Dampers – Tieying
Excellent quality Cabinet Hydraulic Lift - Motion Dampers and Lid Stop Dampers – Tieying Detail:
Properties/Characteristics: Motion Damper and Lid Stop Damper STAB-O-SHOC HD dampers from Tieying are the most cost-efficient type for safe and reliable damping of uncontrolled movements.
As standard motion and lid stop dampers, they are characterized by a simple design, which makes them easy and inexpensive to manufacture. Further advantages are their high quality and safety levels, outstanding performance, and long service life of each damper.
STAB-O-SHOC oil-hydraulic motion or lid stop dampers come in two basic types; damping force is laid out either in the direction of tension or compression. It is characterized by a damping force required in only one direction of motion. It can also be varied path-dependent via the stroke by means of bypass grooves.
As simple lid end stop and motion dampers they are designed for vertical, orientation-specific mounting. However, when equipped with an additional, closed separating element, they can also be installed regardless of orientation.
Therefore, they are ideal as vibration dampers.
For a function overview of our STAB-O-SHOC damper product line, please refer to the selection matrix.
Damper Product Variants
Typical Motion and Lid Stop Dampers
STAB-O-SHOC HD 15 – orientation-specific standard damper for low damping forces
STAB-O-SHOC GD 15 – orientation-specific standard damper for low damping forces with additional extension force
STAB-O-SHOC GD 15 SP – damper for low damping forces with positive force transmission in both directions of motion, non-specific mounting orientation, and additional extension force
STAB-O-SHOC HD 24/29 – orientation-specific standard damper for high damping forces
STAB-O-SHOC GD 24/29 – orientation-specific damper with separating piston for high damping forces in tension and compression direction with additional extension force
STAB-O-SHOC GD 24/29 SP – damper with separating piston, for higher damping forces with positive force transmission in both directions of movement, additional extension force, and non-specific mounting orientation.
STAB-O-SHOC HD 15
Even small and light-weight lids and armatures can present risks.
Especially if they open by themselves or if their fall is not braked. In the worst case, fingers will get squeezed.
To prevent this from happening, there is now the STAB-O-SHOC HD 15 from Stabilus. It gently dampens the motion, and due to its small, simple design it can easily be integrated into any application.
Function
The standard STAB-O-SHOC is a mounting orientation-dependent, non-pressurized oil hydraulic damper, which is preferably installed vertically. Positive and direct force transmission is possible in only one direction of motion.
Advantages
Damping force up to 800 N
Damping forces one-directional, in special cases also bi-directional
Non-pressurized, no extension force
Orientation-dependent mounting, with piston rod down or up
“Plunger damper” – simple design
Applications
Glove compartment
Bar cabinets
Kitchen cabinets
Storage cubicles
Lid dampers
STAB-O-SHOC GD15
The STAB-O-SHOC GD 15 is used whenever light force assist is desired in addition to gentle damping.
Function
In this proven damper from Stabilus, the interior is under higher pressure than in the standard STAB-O-SHOC. The resulting extension force will extend the piston rod automatically. In the compression direction, the damping force will increase by the amount of the extension force.
Advantages
Damping force max. 800 N
Damping forces one-directional, in special cases also bi-directional
With extension force
Orientation-dependent mounting, with piston rod down or up
Applications
End position damper
Light flaps
Soft top damper, e.g., convertible top
Foot-operated parking brakes
End position damper
STAB-O-SHOC GD15 SP
Furniture designers like to let their ideas run free. That requires dampers that can be installed in any position.
Function
Like the GD 15, the STAB-O-SHOC GD 15 SP is under higher internal pressure, which provides additional extension force. In addition, a separating element separates the working chamber from the equalization chamber, enabling positive, direct force transmission in both directions of motion.
Advantages
Damping force max. 800 N
Damping forces one- or bi-directional
With extension force
Positive, direct instant damping
Non-specific mounting orientation
Piston rod installation in any direction
Applications
Consoles
Light flaps
Furniture fittings
Product detail pictures:
Related Product Guide:
We often persist with the theory "Quality To start with, Prestige Supreme". We are fully committed to delivering our clientele with competitively priced good quality items, prompt delivery and experienced support for Excellent quality Cabinet Hydraulic Lift - Motion Dampers and Lid Stop Dampers – Tieying , The product will supply to all over the world, such as: Australia, Jersey, Kuala Lumpur, "Good quality, Good service " is always our tenet and credo. We take every effort to control the quality, package, labels etc and our QC will check every detail during producing and before shipment. We have been willing to establish long business relationship with all those who seek the high quality products and good service. We've got set up a wide sales network across European countries, North of America, South of America, Middle East, Africa, East Asia countries.Please contact us now, you will find our expert experience and high quality grades will contribute to your business.
By Megan from Croatia - 2018.12.11 11:26
On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
By Diego from Bogota - 2018.06.18 17:25
