The front and rear sides of the shell bottom of the wheat machine are provided with grooves, and the top of the inner surface of the groove is provided with a receiving groove. The top of the inner surface of the receiving groove is fixedly connected with a tension spring, and the bottom end of the tension spring is fixedly connected with a support column. The front and rear sides of the shell of the wheat machine are provided with a chute connected with the receiving groove. The support device of the wheat seeder drives the support column to drop and contact the ground by pulling the sliding rod downward, It plays the role of support and facilitates the storage of the support column through the setting of the groove and the receiving groove. Through the matching of multiple fixed grooves and the sliding rods, the sliding rods are rotated to make them enter the fixed groove, realizing the hierarchical adjustment of the height of the support column. Through the matching of the threaded rods and the threaded grooves, the upper and lower positions of the rotating disc are further adjusted, so as to adapt to different terrain and facilitate the use.
The wheat machine uses hydraulic support rod, which can be used to support the height. It uses compressed gas spring, which mainly relies on the force generated by gas compression to carry out deformation. The supporting rod of the wheat machine is installed with compressed air spring. Its principle is that when the spring is subjected to a large force, the space inside the spring will be reduced, and the air inside the spring will be compressed and squeezed. When the air is compressed to a certain degree, it will generate elastic force. At this time, the spring can be restored to the shape before deformation, that is, to the original state. The compressed air spring can play a very good role in supporting, buffering and braking, and the special compressed air spring can also play a very powerful role in angle adjustment and shock absorption.
Guangzhou Tieying Gas Spring Technology Co.,Ltd has 20 years of experience in the production of gas springs. It has its own design team. The quality and service life of Tieying Spring is over 200000 times. There is no gas leakage, no oil leakage, and basically no after-sales problems. If you want to know more about the application of gas spring, please contact us!
Post time: Feb-08-2023
